Precautions for the use of LED lights

LED lighting maintenance needs to pay attention to a few points:

1. Try not to switch on and off frequently when using lamps. Although the switching resistance of LED lamps is about 18 times that of ordinary fluorescent lamps, too frequent will still affect the life of the electronic components inside the LED lamps, thus affecting the life of lamps.

2. Special attention should be paid to that, except for special LED lamps, ordinary LED lamps should be avoided to be used in humid environments. , The humid environment will affect the electronic components of the LED lamp drive power supply, the electronic components will be damp, and the life of the lamp will be shortened.

3. Moisture-proof is the key to lighting maintenance, especially LED lights in bathrooms, bathrooms and stove headlights in kitchens, moisture-proof lampshades should be installed to prevent moisture intrusion, rust damage or leakage short circuit.

4. It is better not to clean the LED light with water. Just wipe it with a dry cloth and water. If you accidentally touch the water, try to dry it as much as possible. Do not wipe it with a wet cloth immediately after turning on the light.

5. Ordinary LED lights cannot be used in circuits of dimming desk lamps, delay switches, and induction switches.

6. Avoid using in high temperature and high humidity environment.

7. The interior of LED lamps is mainly driven by power supply. It is recommended that non-professionals do not assemble and disassemble by themselves, so as to avoid dangers such as electric shock.

Eight, LED lamps and lanterns are generally used when the ambient temperature is 5 ~ 40 ℃.

Nine, the metal part of the LED lighting can not use chemical agents such as polishing powder at will.

10. The dust behind the LED lighting should be cleaned with a dry cloth or duster.